DDosage CalculatorClear units. Traceable arithmetic.

Dosage calculators / Water treatment arithmetic

Units first. Numbers second.

Chemical Metering Pump Rate Calculator

Convert a supplied process dose, flow and active stock concentration into a stock-liquid feed rate.

Water-treatment arithmetic only. Not a human or animal medication tool.

Enter the known values

mg/L
m³/hour
g/L

Enter values from a verified order, label or study question. Fields start empty; no treatment dose is supplied.

Reset

Trace the calculation

Your arithmetic result

Enter all known quantities and press Calculate. Review the result alongside the units and inputs used.

Verify the units and the order. A correct conversion does not establish clinical appropriateness.

The method

Formula and unit cancellation

Result=D×VC

Result unit: L stock/hour

Convert a supplied process dose, flow and active stock concentration into a stock-liquid feed rate.

Read the equation using the variable key below. The output is determined by the entered quantities and their stated units; it does not test the clinical validity of those quantities.

DSpecified active dosemg/L
VWater flowm³/hour
CVerified active stock concentrationg/L

Steps for checking this calculation

  1. Identify the exact output unit: L stock/hour.
  2. Transcribe each required quantity from the verified order, product label or study question.
  3. Normalize the units before substitution. If body weight is entered in pounds, the calculator converts it to kg using 0.45359237 kg/lb.
  4. Review the calculated amount and the inputs used. Clarify any unexpected value rather than applying a result mechanically.

Water-treatment mathematics only. Not for ingestion, injection, human or veterinary medication. The required treatment target must come from an applicable process specification; this tool does not establish disinfection effectiveness or drinking-water compliance. A calculated rate does not calibrate a physical pump.

Input guide: what each number means

Specified active dose (D)

Enter this quantity in mg/L. It represents specified active dose in the equation, not a value inferred from the name of this calculator. Keep the measurement basis and time denominator attached to the number. Empty, nonnumeric and out-of-range values are rejected rather than replaced with a treatment default.

Water flow (V)

Enter this quantity in m³/hour. It represents water flow in the equation, not a value inferred from the name of this calculator. Keep the measurement basis and time denominator attached to the number. Empty, nonnumeric and out-of-range values are rejected rather than replaced with a treatment default.

Verified active stock concentration (C)

Enter this quantity in g/L. It represents verified active stock concentration in the equation, not a value inferred from the name of this calculator. Keep the measurement basis and time denominator attached to the number. Empty, nonnumeric and out-of-range values are rejected rather than replaced with a treatment default.

Check the arithmetic

Worked example with explicit units

Learning example only — these numbers are not a prescription or a dosing chart.

D = 2 mg/L; V = 100 m³/hour; C = 100 g/L.

CalculationOutput
Chemical Metering Pump Rate Calculator2 L stock/hour

How specified active dose changes the arithmetic

Study input DCalculated output
1 mg/L1 L stock/hour
1.5 mg/L1.5 L stock/hour
2 mg/L2 L stock/hour
2.5 mg/L2.5 L stock/hour
3 mg/L3 L stock/hour
4 mg/L4 L stock/hour

Other inputs retain the example basis printed above. A numerical relationship is not a therapeutic recommendation.

Common questions

What does this chemical metering pump rate calculator calculate?

Convert a supplied process dose, flow and active stock concentration into a stock-liquid feed rate. The printed result unit is L stock/hour.

Which values must I already know?

This page needs specified active dose (mg/L), water flow (m³/hour), verified active stock concentration (g/L). An amount ordered, product strength and schedule are separate facts; do not infer a missing one from a search keyword.

What is the key limitation?

Water-treatment mathematics only. Not for ingestion, injection, human or veterinary medication. The required treatment target must come from an applicable process specification; this tool does not establish disinfection effectiveness or drinking-water compliance. A calculated rate does not calibrate a physical pump.

How do I prevent a unit mistake?

Match each field to its printed unit. Milligrams and micrograms differ by a factor of 1,000. A mass is not a liquid volume; mg to mL requires a concentration. Per-dose and per-day coefficients are not interchangeable.

Are the example values or table a recommended regimen?

No. They illustrate arithmetic with fully stated inputs. A real order depends on the ingredient, formulation, route, indication and individual circumstances. The table does not select a dose, give a safe range or assess a patient.

Can I round the result or change a prescribed amount?

The display keeps eight significant digits. Confirm permitted measurement precision with a pharmacist or the device instructions. The tool does not authorize tablet splitting, capsule opening, changed frequency or a missed-dose decision.

Can I download a calculation for a worksheet?

After calculation, Export CSV saves this numerical result and its normalized inputs. Browser printing also works. This is not a native spreadsheet with live formulas, a signed clinical record or a copy of a proprietary nursing examination.

Where is the method documented?

The formal equation, variable units, worked example and published source addresses appear on this page. Labels are used for concentration verification only. No clinical review, guideline approval or professional endorsement is claimed.

Formula sources and label references

Source addresses are printed as text. These references support the arithmetic or named product strengths; they do not endorse this website or establish that an entered order is appropriate.

  • Pennsylvania DEP operator training, Basic Math: chemical feed and dosage calculationshttps://files.dep.state.pa.us/water/bsdw/operatorcertification/TrainingModules/both28_basic_math_wb.pdf
  • NIST Guide to the SI, Appendix B: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors

Method and arithmetic review date: 2026-11-21. Clinical review is not claimed. See the scope page for implemented and excluded topics.